Rail Equipment
DB-VNSO Drive/Brake Controller
The DB-VNSO Drive/Brake Controller provides a rugged control solution for operator to rail equipment interface. Your specific control requirements can be accommodated by a variety of standard and custom engineered configurations.

The versatile design of the DB-VNSO Drive/Brake Controller accommodates a variety of mounting and handle options including mechanical interlock and T-handles, custom mounting plates and enclosures as well as proportional and discrete outputs including microswitches, snap action contacts, encoders, Profibus, CAN-Bus, potentiometers, and PWM for stepped and proportional outputs.

View the rail brochure [PDF]

Propulsion and brake control for use on locomotives, light rapid transit, high-speed rail trains, passenger rail, trams, trolleys, people movers, maintenance of way equipment.

  • Versatile design
  • Heavy duty construction
  • Long life dual compression spring return system
  • 20 million cycle mechanical operating life
  • Nickel chromium gimbal mechanism
  • Hardened steel bearings and polished steel shaft guides
  • Safe and ultra reliable forced open contacts
  • Highly customizable

  • Custom mounting options such as boot and bezel, slotted covers with and without brushes and customized mounting plates
  • Custom screening and engraving
  • Custom gate patterns
  • Friction held handle
  • Custom stepped detents
  • Large selection of output choices
  • Step or stepless construction with momentary or maintained handle action or a combination of both
  • Custom handle configurations including mechanical interlock, twist, and pushbutton handle functions.

VNSO Mechanical data
 Life 20 million cycles
 Gear Ratio 3.5:1
 Detented Positions Up to 7-0-7
 Handle travel +/- 36° / 38° / 45°
 Standard potentionmeter rotation +/- 126°
 Temperature range Operating: -20 to +60° C
Storage: -40 to +70° C
 Protection above the panel IP54
VNSO Electrical data
 Potentiometers Conductive Plastic, 0.5 watt 5K 3-wire or 10K 4-wire center tap, 5 million revolutions Connections: 20 AWG Hi-Temp, XLPVC, UL1430 wire with Molex connector (03-06-2042)
 Electronics PWM Amplifiers, Pot Amplifiers, Motor Control, Optoelectronic Encoder, CAN Bus
Connections: Varies with product
VNSO double contact blocks
 Rating AC 16A 240 VAC continuous
 Rating DC 24VDC Resistive: 1.7 Amps
24VDC Inductive: 1.1 Amps
 Maximum wire size 12 AWG
 Certifications UL Recognized File #E106738(m)
CSA Approved File #15040
Snap action contacts
 S800 AC Inductive: 3 Amps 230V
DC Inductive: 1 Amp 110V
 S826 AC Inductive: 1 Amp 230V
DC Inductive: 0.5 Amps 110V
 S870 AC Inductive: 6 Amps 230 V
DC Inductive: 6 Amps 24 V