Single
Single, Dual or Three*
*Third axis is achieved via a twist handle function or thumbwheel.
Contacts, Microswitches, Potentiometer, Hall-Effect, PWM & CAN
Hall-Effect, CANOpen, Basic CAN, J1939 & 4-20mA
Spring Return or Friction Brake
Spring Return
+/- 36 degrees for potentiometer
+/- 20 degrees for Bang/Bang and Hall-effect
+/- 20 degrees each axis
Open or Cross
Up to 3-0-3 with microswitches
Up to 5-0-5 with NSO contact blocks
2 Piece, Round Ball, Mechanical Interlock, RH, RHS, BH, FG-2, FG-3, FG-4, FG-5, MG1, MG2, MG13, MG27, TH30, G56
Round Ball, BH, RH, RHS, FG-3, FG-4, FG-5, G58, MG1, MG13, MG27 & TH30
10 million cycles
20 million plus cycles
Cast Aluminum body with plated steel side plates with self lubricating bearings, hard nickel chromium spring return arms, compression style return spring and brass gears.
High strength, glass filled nylon housing.
2 lbs.
2 lbs.
8 in. x 6 in. x 6 in.
8 in. x 8 in. x 8 in.
Drop-in or Panel (from below)
Drop-in or Panel (From Below)
2.56" x 2.56"
See literature for additional mounting specifications
2.76" x 2.76 Panel mount
3.54" x 3.54" Drop-in mount
See literature for additional mounting specifications
IP55
IP54
-13 to +158 degrees F [-25 to +70 degrees C]
-13 to +158 degrees F [-25 to +70 degrees C]
-40 to +158 degrees F [-40 to +70 degrees C]
-40 to +158 degrees F [-40 to +70 degrees C]
Switch Type:
SPDT (Form C) V Series Microswitches
Double Pole Snap-In Contact Blocks (PRO-4N)
Max. Number:
Up to 4 with potentiometer
Up to 6 without potentiometer
Up to 3 contact blocks (PRO-4N)
Current Rating (AC):
11A
16A (PRO-4N)
Voltage Rating (AC):
250
240 (PRO-4N)
Termination:
.187" x .20" male quick connect
Saddle clamps (PRO-4N)
Max. Wire Size:
18 AWG for microswitch
12AWG for contact block (PRO-4N)
Supply Voltage:
4.5 to 5.5 VDC
Output Voltage:
Ratiometric 0.5 - 2.5 - 4.5 +/- 0.15V @ 5.0V supply
Additional supply and output options available
Output Current: 10mA
Power Consumption: 20 mA @ full load
Termination:
20 AWG wire 6" leads with mini-fit connector
EMC Emissions: Complies with EN61000-6-4:2007 Class A Group 1, 80-1000 MHz
EMC Immunity: Complies with or exceeds EN61000-6-2:2005, expanded to include:
RFI Immunity of 100 V/M @ 80-1000 MHz
ESD Immunity of 15Kv air, 8Kv contact
Supply Voltage:
4.5 to 5.5 VDC
Output Voltage:
Ratiometric 0.5 - 2.5 - 4.5 +/- 0.15V @ 5.0V supply
Additional supply and output options available
Output Current: 10mA
Power Consumption: 20 mA @ full load
Termination:
20 AWG wire 6" leads with mini-fit connector
EMC Emissions: Complies with EN61000-6-4:2007 Class A Group 1, 80-1000 MHz
EMC Immunity: Complies with or exceeds EN61000-6-2:2005, expanded to include:
RFI Immunity of 100 V/M @ 80-1000 MHz
ESD Immunity of 15Kv air, 8Kv contact
CANOpen, J1939 or basic CAN protocols
4 analog inputs
8 digital inputs
2 digital outputs
See a complete listing of CANbus technical data in ESS408 CAN Based Interface Module Board literature
CANOpen, J1939 or basic CAN protocols
4 analog inputs
8 digital inputs
2 digital outputs
See a complete listing of CANbus technical data in ESS408 CAN Based Interface Module Board literature
Reference product literature for additional specifications
Reference product literature for additional specifications
