Multi-Axis

CS3 Joystick

The CS3 is an extremely rugged joystick in an ultra-compact and versatile design. The durable housing and center pivot design make this device resistant to abuse and ideally suited for high duty cycle applications.

1, 2 and 3 axis control is available as well as a variety of standard and custom handles and grips with push buttons and levers. Both separate and simultaneous operation of each is achieved with standard gate patterns.

Request Quote

CS3 Literature

CS3 Service Bulletin

Handle Wiring Information

Overview

Compact and rugged construction design
Proprietary blend, ultra-tough boot
Environmentally sealed mounting and corrosion resistant components
Smooth high-life non-biasing compression style spring return
Single and dual axis operation
Long life Hall-effect technology
Meets or exceeds CE EMC requirements
Conformal coated electronics to resist moisture

Axis Options

• Single
• Dual
• Three

Three Axis

Third axis is achieved via a twist handle function or thumbwheel.

Output Options

• Hall-Effect
• CANOpen
• Basic CAN
• J1939
• 4-20mA

Shaft Diameter Options

• Standard

Standard

Standard shaft that allows up to 8 wires.
• Heavy Duty

Heavy Duty (CS3HD)

Heavy duty shaft that allows up to 16 wires.

Handle Travel Options

• Open Gate

Open Gate

Unrestricted handle travel up to +/-20°
• Cross Gate

Cross Gate

Guided handle travel up to +/-20°

Joystick Action

• Spring Return

Spring Return

Handle returns to center

Mounting Style

• Drop-in (From Above)
• Panel (From Below)

Compatible Handles

Applications

The CS3 is often used in mobile equipment applications where reliability and a high level of functionality are required. Typical applications include:

On and Off highway mobile equipment
Scissor lifts, boom lifts & aerial work platforms
Construction & agricultural machinery
Road maintenance & refuse vehicles
Boats and marine equipment
And more

Industries

Agriculture

Construction / Off-highway

Specifications

Download

General Data

# of Axis

Single, Dual or Three*
*Third axis is achieved via a twist handle function or thumbwheel.

Output Options

Hall-Effect, CANOpen, Basic CAN, J1939 & 4-20mA

Joystick Action

Spring Return

Handle Travel

+/- 20 degrees each axis

Gate

Open or Cross

Handle Compatibility

Round Ball, BH, RH, RHS, FG-3, FG-4, FG-5, G58, MG1, MG13, MG27 & TH30

Life

20 million plus cycles

Materials

High strength, glass filled nylon housing.

Est. Shipping Weight

2 lbs.

Est. Shipping Dimensions

8 in. x 8 in. x 8 in.

Mounting Data

Mounting Style

Drop-in or Panel (From Below)

Mounting Footprint

2.76" x 2.76 Panel mount
3.54" x 3.54" Drop-in mount
See literature for additional mounting specifications

Environmental Data

IP Rating

IP54

Operating Temperature

-13 to +158 degrees F [-25 to +70 degrees C]

Storage Temperature

-40 to +158 degrees F [-40 to +70 degrees C]

Electrical Data

Hall-Effect Specifications

Supply Voltage:
4.5 to 5.5 VDC

Output Voltage:
Ratiometric 0.5 - 2.5 - 4.5 +/- 0.15V @ 5.0V supply
Additional supply and output options available

Output Current: 10mA

Power Consumption: 20 mA @ full load

Termination:
20 AWG wire 6" leads with mini-fit connector

EMC Emissions: Complies with EN61000-6-4:2007 Class A Group 1, 80-1000 MHz

EMC Immunity: Complies with or exceeds EN61000-6-2:2005, expanded to include:
RFI Immunity of 100 V/M @ 80-1000 MHz
ESD Immunity of 15Kv air, 8Kv contact

Can Specifications

CANOpen, J1939 or basic CAN protocols

4 analog inputs
8 digital inputs
2 digital outputs

See a complete listing of CANbus technical data in ESS408 CAN Based Interface Module Board literature

Additional Specifications

Reference product literature for additional specifications